GASSONIC Observer-i - Spare Parts and Accessories; Installation Drawings; Calibration Equipment; Test Equipment

GASSONIC OBSERVER-i
85
8.3. Spare Parts and Accessories
To order spare parts and/or accessories, please contact the nearest Gassonic Representative or,
Gassonic directly, and give the following information:
• Part Number of Spare Part or Accessory
• Description of Spare Part or Accessory
• Quantity of Spare Part or Accessory
8.3.1. Installation Drawings
805560: Wiring Drawing
8.3.2. Calibration Equipment
80510-1: 1701 Portable Calibrator
8.3.3. Test Equipment
SB100-1-1: SB100 Ultrasonic Bump Tester
8.3.4. Spare Parts
Description Part Number
Allen Screw M6x20 928-381
Lock Washer 928-651
O-ring 925-5108
Microphone 805773-1
Sound Source Assembly 805554-3
Magnet-stick 80499-1
Mounting Bracket and Hardware 80601-1
Windscreen 80333-1
Windscreen Support Assembly 805708-1
12 mm Ratcheting Wrench (for install and removal of
microphone)
954-024
Relay Board Screw 805541-2
10mm Relay Board Spacer 928-459
Screw M4 x 16mm Relay Board Mounting 928-393
Table 33: Replacement Parts