75
CLEANING / UNBLOCKING THE FILTERS, PORTAFILTER AND GROUP HEAD
Periodically run water through the machine with the portafilter in place, but without any
ground espresso in the filter, to rinse out any residual coffee particles.
Should the fine holes in the filters become blocked follow the following steps:
1. Place the filter into the portafilter. Run water through the machine with the filter and
portafilter, without any ground espresso, in place.
2. The fine pin on the cleaning tool can be used to clear any grinds in the filter holes.
3. To clean the single wall filters simply run water through the portafilter using the manu-
al pour function by holding down the one cup button.
4. For a thorough clean of the filters, run a cleaning cycle of the machine with the por-
tafilter and filter in place.
Note:
Pin on Cleaning Tool is extremely sharp. Use care when using.
CLEANING THE OUTER HOUSING / CUP WARMING PLATE
The outer housing and cup warming plate can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can
scratch the surface.
To Next Page
Loading...
