Gateway 600 - Replace Modem or CMOS Battery

65
Replacing the audio board
www.gateway.com
Replacing the audio board
Tools you need to complete this task:
Screws removed during this task:
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
Torx T8 screwdriver
4 chrome 2.5×4mm
(left speaker)
1 chrome 2.5 × 4 mm
(audio board)
1 chrome 2.5 × 7 mm
(near touchpad)
1 chrome 2.5 × 4 mm
(near multifunction
buttons) (palm rest)
4 chrome 2.5 × 5 mm
(back)
13 chrome 2.5 × 5 mm
(bottom)
5 chrome 2.5×4mm
(keyboard)
4 chrome 2.5 × 5 mm
(hinge covers)
4 or 6 chrome 2.5 × 7 mm
(LCD panel hinges)