www.gateway.com
91
Replacing the hard drive kit
If you would like more hard drive capacity, you can replace
your original drive with a higher-capacity drive.
To replace the hard drive kit:
1 Create a Drivers and Applications Recovery disc using
the Gateway Recovery Center. For more information,
see “Recovering pre-installed software and drivers” on
page 73.
2 Back up any data you want to transfer to the new hard
drive. For more information, see “Backing up files” in
your online User Guide.
3 Follow the guidelines under “Preventing static
electricity discharge” on page 86.
4 Turn off your notebook.
5 Disconnect the AC adapter, modem cable, and network
cable.
6 Disconnect all peripheral devices connected to the
notebook and remove any PC cards.
7 Turn your notebook over so the bottom is facing up,
then remove the battery. For more information, see
“Changing the battery” on page 51.
Tools
You need a small Phillips screwdriver to replace the hard drive kit.
Hard drive kit
To Next Page
Loading...
