Gateway Remote Control - Page 36

32
Remote Control User’s Guide
www.gateway.com
4 Use the number pad to enter your password when prompted. If you have
not set a password, enter 0000. If you have forgotten your password, enter
0905.
5 Press the and buttons to select the SET CODE sub-menu, then press
the button to change the settings.
6 Use the number button pad to enter a new four-digit password when
prompted.
7 Re-enter the new four-digit password when prompted.
8 Press EXIT to close the OSD.
Enter Code
* * * *
Enter New Code
* * * *
Re-Enter New Code
* * * *