16 Gateway Solo™ 2100 Multimedia Notebook
To check/change the power button setting:
1. Turn the system on.
2. Press the F2 key when you see the message Press <F2> to access
SETUP in the lower left corner of the display, before Windows 95 loads,
to access the Setup menus. The system beeps, then the Main menu
appears.
3. Using the Right Arrow key, move to the Power menu.
4. The first available option is Power button mode:. If the setting displayed is
the one you want, go to Step 6.
5. Press the Spacebar to change the setting.
6. Press the ESC key to access the Exit menu.
7. Press Enter to Save changes & exit, then press Enter again, or use the
Down Arrow key to select any other option.
To Next Page
Loading...
