User’s Guide 51
Setup Menus
The Gateway Solo™ 2100 Multimedia Notebook contains a series of Setup
menus that control basic setup, security, and power settings. You can modify
the options controlled by these screens to tailor the system’s functionality to
best support the way you use it.
Note: All of the following illustrations depicting the Setup menus are shown
with options set to the factory defaults.
To access the Setup menus:
1. Power up the system.
2. Press the F2 key when you see the message
Press <F2> to access
SETUP in the lower left corner of the display
before Windows 95 loads
.
The system beeps, then the Main menu appears.
3. Follow the instructions along the bottom of the menus to navigate
through the different options and menus. An Item Specific Help bar
providing additional information is also located along the right side of
each menu.
To Next Page
Loading...
