Gateway Solo 2100 - LCD Display Operation

User’s Guide 17
LCD Display
The Gateway Solo™ 2100 Multimedia Notebook features a built-in, backlit,
color LCD display. This display is either an 11.3-inch DSTN, 11.3-inch TFT, or
12.1-inch TFT display. Each of these SVGA displays provides sharp, crisp
resolution and crystal clear color.
Figure 10. LCD Display
Tilt the system’s entire cover forward or backward to adjust the viewing
angle. Press the Fn key together with the Left Arrow and Right Arrow keys
to control display contrast (DSTN display only), or press the Fn key together
with the Up Arrow and Down Arrow keys to control display brightness.
Pressing the Fn key together with the F1 (Display Off) key will toggle off the
display and save power. Press any key to reactivate the display.
A few small dots of color may occasionally appear on the screen. This is
normal and does not affect the overall screen image.
Connect an external monitor to the computer through the VGA port on the
rear of the system, or the VGA port on the optional mini-docking station.
Press the Fn key with the F3 (LCD/CRT) key to toggle between active
displays.
Note: This system ships with the Auto dim with battery only feature enabled.
Auto dim cuts LCD power 50% when the system is operating on battery
power.
à
See page 19.
à
See page 60.