User’s Guide 55
Option To Change Setting
Serial port Select, use the Spacebar to access:
COM1: 3F8h IRQ4; COM2: 2F8h IRQ3; COM3: 3E8h IRQ4;
COM4: 3E8h IRQ3; Disabled
IR port Select, use the Spacebar to access:
COM2: 2F8h IRQ3; COM3: 3E8h IRQ4; COM4: 3E8h IRQ3;
Disabled; COM1: 3F8h IRQ4
Parallel port address Select, use the Spacebar to access:
LPT1: 378h IRQ7; Disabled; LPT2: 278h IRQ5; LPT3: 378h IRQ7
Parallel port mode Select, use the Spacebar to access:
ECP; Output Only; Bi-Directional
Diskette controller Select, use the Spacebar to access: Enabled; Disabled
On-board IDE adapter Select, use the Spacebar to access:
Primary; Secondary; Disabled
On-board stereo sound Select, use the Spacebar to access: Enabled; Disabled
I/O channel Stereo sound enabled, select, use the Spacebar to access:
220H - 22FH; 230H - 23FH; 240H - 24FH; 250H - 25FH
MPU channel Stereo sound enabled, select, use the Spacebar to access:
330H - 331H; 300H - 301H
IRQ channel Stereo sound enabled, select, use the Spacebar to access:
IRQ5; IRQ7; IRQ9; IRQ10
DMA channel low Stereo sound enabled, select, us the Spacebar to access:
DMA1; DMA3; DMA0
DMA channel high Stereo sound enabled, select, us the Spacebar to access:
DMA5, DMA6, DMA0
Table 4. Integrated Peripherals Menu Options
Press Esc when you have finished using the sub-menu, or wish to return to
the main Advanced menu.
Plug & Play OS
Set to Yes for Windows 95. Set to No if you are using a different operating
system, or a PCMCIA card that needs real mode drivers (does not already
have Windows 95 drivers).
Reset configuration data
Be careful with this setting, since this option clears system configuration at
the next boot if set to Yes.
Large disk access mode:
Set to On if your operating system is DOS or Windows. Set to Off if you are
using any other operating system.
Press the Esc key to access the Exit menu and accept/discard changes. Press
F9 to return to the factory defaults, or F10 to return to the previous settings.
Use the Right Arrow key to tab over to the next screen.
To Next Page
Loading...
