Gateway Solo 2500 - Connecting to AC Power

18 Using Your Gateway Solo 2500 Multimedia Notebook
Connecting the AC power
Your AC adapter comes in two parts:
♦ Power cord
♦ AC power adapter
1.
Connect the power cord to the AC power adapter.
To connect the AC adapter
Caution!
Replace the power cord if it
becomes damaged. The
replacement cord must be
of the same type and
voltage rating as the
original cord.
Warning!
Do not attempt to
disassemble the AC
adapter. The AC adapter
has no user-replaceable or
user-serviceable parts
inside. The AC adapter has
dangerous voltages that
can cause serious personal
injury or death. Contact
Gateway about returning
defective AC adapters.