48 Using Your Gateway Solo 2500 Multimedia Notebook
5.
Press the PC Card eject button, located to the left of the PC Card slot,
to release the eject button.
6.
Press the PC Card eject button a second time to eject the PC Card.
7.
Press the PC Card eject button to reset back into the notebook.
Using the IR port
The IR (infrared) port built into the back of your notebook (see “Fast IR port”
on Page 10) uses infrared technology to send and receive signals between the
notebook and a remote device equipped with an IR port. A variety of desktop
computers, printers, and other peripherals are IR-equipped. Use the
manufacturer’s documentation to setup a remote IR device.
Your notebook shipped with the IR port enabled. If you do not use the IR
port and need to make more resources (IRQs) available for other commonly
used devices, then use the following steps to disable the IR port.
To Next Page
Loading...
