14
3. Safety guidelines and measures
Warning! Keep the controller away from fire, excessive heat, water, dust and
contamination.
Warning! The Gavita Master controller EL2 may only be used to control
compatible Gavita e-series ballasts. Do not connect the Controller to other
products as this may be dangerous and may cause malfunctions in the
connected equipment. Doing so will void the warranty.
Warning! The ECM channels of the Gavita Master controller EL2 may only be
connected to Gavita ECMs. Do not connect the Controller to other products as
this may lead to malfunctions or damage and can be dangerous. Doing so will
void the warranty.
Warning! Do not open or disassemble the controller, it contains no
serviceable parts. Opening the controller will void its warranty.
4. Installing the controller
4.1. Placing the controller
Warning! The area in which the product is placed must comply with the
conditions specified in paragraph 2.3.
Caution! Only mount the product on a sturdy, solid background.
Note: Use the included plugs for hard surfaces.
•
Determine the optimal location for the controller
•
Carefully pry the mounting clamp from the controller using a prying tool
or a flat head screwdriver (1) (tape it to prevent damage to the housing).
1 Removing mounting clamp
To Next Page
Loading...
Need help?
General