Guangcheng Technology GCAN-PLC user manual
1. Introduction
1.1 Overview
GCAN-PLC-510 programmable logic controller is a bus module controller
integrated with PLC function. It has the characteristics of compact, cost-
effective, can be used to connect the CAN-Bus system, Modbus system and
distributed bus terminal module, and these terminal modules can be expanded
in a modular way.
A complete control system consists of a bus module controller (GCAN-
PLC-510),1-32 arbitrary number of GC series terminal modules (GC-1008,
GC-3804, etc.) and a terminal module.
The GCAN-PLC-510 supports automatic configuration. You do not need
to set parameters on the computer. The controller will automatically assign the
I/O interface according to the positional relationship of the inserted terminal
module.
The GCAN-PLC-510 is programmed according to the IEC 61131-3
standard using the OpenPCS programming system. OpenPCS programming
system provides a variety of debugging features (such as breakpoints, single-
step, monitoring, etc.) to make debugging easier. The GCAN-PLC-510
configuration/programming interface is a Micro-USB interface that can be used
to load PLC programs.
The GCAN-PLC-510 complies with the ISO 11898 CAN bus protocol.
Support CANopen/ Modbus RTU/ Modbus TCP communication protocol and
can be used as CANopen/ Modbus RTU/ Modbue TCP master or slave.
GC series programmable controller expansion module currently includes:
digital input expansion module, digital output expansion module, analog input
expansion module, analog output expansion module, Pulse input and output
module, communication port expansion module (RS232/485, 4G, Bluetooth,
WiFi, Zigbee,GPRS, etc.) For detailed selection list, please refer to Chapter 6
of this manual.
To Next Page
Loading...
Need help?
General
