GCAN GCAN-PLC-510 User Manual

5
Guangcheng Technology GCAN-PLC user manual
1.2 Performance
● One-channel CAN-Bus interface, one-channel Ethernet interface, one-
channel RS232/485 (multiplexed) serial interface
● Programming Software: OpenPCS ( according to IEC 61131-3standard)
● Support CANopen protocol master/slave function
● Support Modbus RTU/TCP master/slavefunction
●
In the case of sufficient power supply (plus expansion power modules), the
number of expandable IO modules is up to 32 (up to 32x8 DI/DO points)
● Transmit 4 PDOs ( CANopen) and receive 4 PDOs (CANopen)
●
Configuration mode is automaticconfiguration
● Supply power: 24V DC（18~30V）
● Input current, 400mA+ ( total GC-bus current)
● Starting current: about 2.5 times continuouscurrent
● Power contacts: maximum24VDC
● Electrical isolation: 1500Vrms
● Working temperature: -40.00
℃
~85.00
℃
● Protection level: IP20
1.3 Typical application
Connect with the distributed bus terminal module to form a complete programmable
control node.

GCAN GCAN-PLC-510 Specifications

General

Brand	GCAN
Model	GCAN-PLC-510
Category	Controller
Language	English