GCI E84 - User Manual

GCI E84 Emulator
Getting Started
Version 2.4a

Summary

E84 Emulator Application Installation

E84 Emulator Hardware Connection and Power Up

Connecting the E84 Emulator via USB

Instructions for establishing a USB connection between the PC and the Emulator.

Powering On and Verifying Status LEDs

Guide to powering on the emulator and checking LED status indicators.

E84 Emulator Communication and Transceiver Use

Connecting and Using Optical Transceivers

Navigating the E84 Emulator Graphical User Interface

Automated Active and Passive Mode Test Setup

Screens for setting up Active and Passive Mode test configurations.

Continuous Handoff Test Setup Configuration

Defining the Continuous Mode Test Sequence

Creating custom test sequences using available cycles.

Automated Testing Execution and Monitoring

Automated Test Screens and Status Display

Displays test status information during automated testing.

Operator Action Prompts During Testing

Test Parameter Configuration and Result Entry

Default Timer Settings and Pass;Fail Marking

Configuring timers and manually marking test results.

Automated Testing Completion and Manual Controls

Manual Control of E84 Interface Signals

E84 Test Plans and Connector Pinout

E84 Emulator Connector Pinout Details

Technical Support and Resources for E84 Emulator

GCI E84 Specifications