16
. Use the cordless handset or base number pad to enter your three digit area code.
NOTE: If you make a mistake, press the DELETE button to erase a
wrong number.
3. Press FLASH/PROGRAM again to store your selection.
Registration
Registration links the base to a cordless handset. Once a handset is registered it
can use the base’s phone connection. A cordless handset will not operate until it is
registered to the base. During the registration process, keep the handset near the base.
1. Press the FLASH/PROGRAM button on the base until LINK HANDSET? shows in the
display. 2NO is the default setting.
. Press the 1 number key or press the REVIEW or NEXT button on the base to
scroll to 1YES.
3. Press FLASH/PROGRAM on the base to conrm handset is linked to the base.
WAITING HANDSET REGISTRATION shows in the display.
4. Press the ash/program button on the handset until LINK BASE shows in the
display. NO is the default setting.
5. Press VOL/CID (- or +) button on the handset to scroll to 1YES.
6. Press ash/program on the handset again to conrm. You will hear a long
conrmation tone when the handset is successfully linked to the base.
Default Setting
NOTE: This setting may be made on both the base and the cordless
handset, independent of each other.
1. Press the FLASH/PROGRAM button until DEFAULT SETTING or DEFAULT shows in
the display. 2NO is the default setting.
. Press 1 or on the cordless handset or base touch-tone pad or use the REVIEW or
NEXT button on the base or the VOL/CID (- or +) button on the handset to scroll to
1YES or 2NO.
NOTE: If you choose YES all settings in the programmable menu
return to factory defaults except day and time.
3. Press FLASH/PROGRAM again to store your selection.
To Next Page
Loading...
Need help?
General
