37
Accessing the Answering System from Another
Location
You can access your answering system from any touch-tone phone by entering your
3-digit security code after you hear the outgoing announcement.
1. Dial the phone number the answering system is connected to.
. After the answering system answers, enter the security code after you hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
The remote feature enables you to perform the following functions:
To Press this Button
Review message 1
Play back messages
Stop message playback
Erase message 0 (during message playback)
Skip message 3
Turn off/on answering system 4
Review voice menu options 7
The base LCD shows REMOTE ACCESS ANSWERING CALL.
Tip: You can bypass the outgoing announcement by pressing any
numbered key on the touch-tone pad while the announcement
is playing. Then, you can enter your security code to access the
answering system.
Changing the Security Code
The default security code for accessing the answering system from another location
is 1 3.
The security code is set through the programming menu. Refer to Telephone Set Up
for more information.
To Next Page
Loading...
Need help?
General
