31
To Change: Follow the steps under Storing a Name and Number in Memory except
replace the stored name or number with the new information.
To Delete: Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button, then press the desired memory location button (0 through 9 number
keys) or use the REVIEW or NEXT button (base) or the VOL/CID (- or +) button (cordless
handset) to scroll to a desired memory.
1. While the entry displays, press DELETE (base) or CHAN/delete (cordless handset)
button to mark the entry for deletion. The display shows DELETE?
. Press DELETE again to delete the entry. **DELETED** is displayed.
Dialing a Stored Number
Handset:
Make sure the phone is ON by pressing the TALK/call back button on the
cordless handset.
1. Press the MEMORY/conference button.
. Press the desired memory location button (0-9). The stored telephone number
dials automatically.
-Or-
1. Make sure the phone is OFF (not in TALK mode).
. Press the MEMORY/conference button.
3. Press the desired memory location button (0-9), or use the VOL/CID (- or +) button to
scroll to the desired telephone number.
4. Press the TALK/call back button. The stored telephone number
dials automatically.
Base:
Press the SPEAKER/CALL BACK button, or lift the corded handset.
1. Press the MEM/CONFERENCE button.
. Press the desired memory location (0-9). The number
dials automatically.
To Next Page
Loading...
Need help?
General
