GE 27956FE1 - Ring Volume; Tones

4
Language
From the Setup HS Menu:
1. Use the cid/vol (3or4) button to scroll to the Language
sub-menu.

. Press the menu button to enter the menu.

. Use the cid/vol (3or4) button to select English, Français or Espanol. The
default setting is English.
4.
Press the menu button to save your selection.
Ring Volume
There are 4 volume levels for your selection. They are Volume 1 to  and Ringer off
respectively.
From the Setup HS Menu:
1.
Use the cid/vol (3or4) button to scroll to the Ring Volume sub-menu.

. Press the menu button to enter the menu. Use the cid/vol (3or4) button to scroll
to your selection. The default setting is VOL 3.

. Press the menu button to save your selection and the new volume setting shows
in the display.
NOTE: Ringer can be disabled by pressing the mute/clear/ringer on/off
button in standby mode, please refer to “Ringer On/Off”.
Tones
From the Setup HS Menu:
1. Use the cid/vol (3or4) button to scroll to the Tones sub-menu.

. Press the menu button to conrm and you may program the following items: Low
Battery, No Coverage and Key Tone.

. Use the cid/vol (3or4) button to scroll to the item you want to program and
press the menu button to enter.
Low Batt
ery - You may set the warning beep to “On” when your handset battery
is low, so as to alert you to charge the battery. Use the cid/vol (3or4) button to
scroll to On or Off, then press the menu button to save the setting. The default
setting is On.
No Coverage - You may set the warning beep to “On” or “Off” when the handset
is out of range. Use the cid/vol (3or4) button to scroll to On or Off, then press
the menu button to save the setting. The default setting is On.