GE 27956FE1 - Editing a Redial Record before Dialing; Storing a Redial Record in Phone Book; Deleting a Redial Record

0
Editing a Redial Record Before Dialing
1. Make sure the phone is OFF (not in talk mode).
. Press the redial button rst, then use the cid/vol (3or4) button to select the
desired redial number.

. Press the menu button.
4.
Use the cid/vol (3or4) button to scroll to Select.
5.
Press the menu button to enter edit mode.
6.
Use the cid/vol (3or4) button to move the cursor forward or backward. Use the
touch-tone pad to add digits or press the mute/clear button to backspace and
delete one digit at a time.
7.
After editing, press the talk/call back button to dial the modied redial number.
Storing a Redial Record in Phone Book
1. Make sure the phone is OFF (not in talk mode).
. Press the redial button rst, then use the cid/vol (3or4) button to scroll to the
desired redial number.

. Press the menu button.
4.
Use the cid/vol (3or4) button to scroll to Save number.
5.
Press the menu button to enter edit mode.
6.
The screen displays Enter name. Input a name. Please refer to section “Handset
Name” for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
7. Press the menu button to save. The screen displays Saved. Repeat steps 
through 7 to save other records.
Deleting a Redial Record
1. Make sure the phone is OFF (not in talk mode).
. Press the redial button rst, then use the cid/vol (3or4) button to select the
desired redial number.

. Press the menu button.
4.
Use the cid/vol (3or4) button to scroll to Delete?.
5.
Press the menu button to delete the record. The screen displays Conrm?.
6.
Press the menu button again to conrm the deletion. The screen displays Deleted.
NOTE: Press the ash/exit button to return to the standby mode
without deleting any redial records.