GE 27956FE1 - Base Setup; Area Code; Dial Mode; Date;Time

6
Base Setup
1. Make sure your phone is OFF (not in talk mode).
. Press the menu button to go to the main menu.

. Use the cid/vol (3or4) button to scroll to Setup BS.
4.
Press the menu button to conrm and you may program the following items: Area
Code, and Dial mode.
Area Code
The telephone uses the pre-programmed area code to determine the number format
to display when a valid Caller ID record is received. The pre-programmed area code is
also used for the Dialback feature.
From the Setup BS Menu:
1.
Use the cid/vol (3or4) button to scroll to the Area code sub-menu.

. Press menu button to enter the menu. The screen displays Enter area code.

. Use the touch-tone pad to enter your -digit area code.
4. Press the
menu button to save the setting.
NOTE: If you want to overwrite the area code, you must delete the
existing one rst.
Dial Mode
From the Setup BS Menu:
1. Use the cid/vol (3or4) button to scroll to the Dial mode sub-menu.

. Press the menu button to enter the menu and use the cid/vol (3or4) button to
select Tone or Pulse.

. Press the menu button to save your selection.
Date/Time
NOTE: Time set on handset will be transferred to the base unit
automatically.
1. Make sure your phone is OFF (not in talk mode).
. Press the menu button to go to the main menu and use the cid/vol (3or4)
button to scroll to Date/Time.

. Press the menu button to enter the menu. The screen displays Year 2008.
4.
Use the touch-tone pad to enter the last two digits of the current year (range: 00
to 99).