16
NOTE: You can use MENU at any time to scroll through the settings.
Also, if you don’t make a selection within 30 seconds, the unit
automatically exits the setup menu.
TIP: You can use the keypad to enter all the digits in one step. To
enter 891, press 8,9, and 1. Then press ENTER.
Message Volume
Use the VOLUME
^
and v buttons to adjust the volume when playing back messages
and while reviewing or changing the setting.
Ringer Volume
Use the VOLUME
^
pt and v buttons to adjust the loudness of the ringer when the
handset is not in use. The phone gives a sample ring when adjusting.
Handset Volume
Use the VOLUME
^
pt and v buttons to adjust the handset listening volume while it is in
use.
Speakerphone Volume
Use the VOLUME
^
and v buttons to adjust the speakerphone listening volume while
it is in use.
Telephone Operation
Using the Speakerphone
Speakerphone Location
For best speakerphone performance, avoid the following:
• Areas with high background noise. (The microphone might pick up these sounds
and prevent the speakerphone from going into the receiving mode when you nish
talking.)
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which
can generate an echo effect.
To Next Page
Loading...
