GE 29897GE1 - Installing the Phone; Base Layout; Desktop Installation

7
Base Layout
NEXT (button)
PLAY/STOP (button)
REVIEW (button)
DELETE (button)
MEMO (button)
STORE (button)
MENU (button)
ENTER/DIAL (button)
ANSWER/ON/OFF
(button)
GREETING (button)
VOLUME (buttons)
MUTE (button)
FLASH/EXIT (button)
SPEAKER (button)
REDIAL/PAUSE (button)
Hook switch
NEW MESSAGE/
CID (indicator)
SPEAKER (indicator)
Microphone
Installing the Phone
Desktop Installation
CAUTION: Only use the 5-2644 power adaptor that was packed
with this unit. Using other power adaptors may damage the unit.
1. Plug the coiled cord into the handset. Plug the other end into the jack on the side of
the base.
2. Place the handset in the base.
3. Plug the telephone line cord into the LINE jack on the back of the phone. Plug the
other end into a wall jack.