GE 29897GE1 - Erase Messages; Leaving a Memo; Memory Full Indicator

20
• To restart the message that is playing, press and hold REVIEW until the message
restarts.
• To replay the previous message, press and release REVIEW.
• To play the next message, press and release NEXT.
Erase Messages
Single Messages
You can erase a message itself, leaving the Caller ID information.
• While the message is playing, press and release DELETE. The unit erases the
current message and announces, “Message erased.”
All Messages
You can also erase all the old messages only, leaving the new messages and Caller ID
information.
While the unit is in ready-to-answer mode, press and hold DELETE until the unit
announces, “Messages erased.”
• New messages can not be erased in this way. To erase new messages, play them
then press DELETE during play back.
Leaving a Memo
Use the MEMO button to record a specic message for others who have access to
the unit.
1. Press and hold the MEMO button. The unit announces, “Record your memo after
the tone.”
2. Record your message after the beep.
3. Release MEMO when you’re nished talking. The unit treats the memo as a
message, as the display shows.
Memory Full
When the unit’s memory is full, it answers after 10 rings and announces, “Memory
is full. No messages will be recorded.” A 20-second waiting period follows, allowing
you to enter your security code.