GE Allegro User Manual

Condition Visual display Audible response
Sensor test in progress Sensor Test, followed by sensors
to be tested
Four beeps every minute for the
last five minutes, one beep every
second for the last minute
Sensors to be tested Test <zone sensor #> <sensor
text>
Beeps once for each
transmission, up to eight times
Sensor test okay All OK High level beep when sensor
heard from received
AC power okay System is OK None
AC power failure AC Fail with normal display +
Press Status, AC Fail
Four short beeps every minute
Panel battery voltage okay System is OK None
Panel battery voltage low Press Status, Low CPU Battery Four short beeps every minute
Phone communication
failure
Press Status, Phone 1/2 Failure Four short beeps every minute
Panel receiver failure Press Status, Trouble + Receiver
Failure
Four short beeps every minute
Panel receiver interference Press Status, Trouble + Receiver
Interference
Four short beeps every minute
Protest – unable to arm due
to open sensor
Protest, Open + <sensor name> Long beep followed by short
beep, then repeated
Waiting for access code
before entering user
programming mode
Enter Code + For Settings None
Alarm report aborted Aborted None
Alarm report canceled Cancelled None
Sensors, touchpads, other device status
Sensor closed (okay) None None
Restoral required sensor
open
Press Status, Open + <sensor
name>
None
Restoral required sensor
tamper open
Press Status, Open + Trouble +
<sensor name>
None
Bypassed sensor Press Status, Bypassed +
<sensor name>
None
RF sensor supervisory failure Press Status, Trouble + <sensor
name>
Four short beeps every minute
RF sensor low battery Press Status, Low Battery +
<sensor name>
Four short beeps every minute
Hardwire sensor trouble Press Status, Trouble + <sensor
name>
Four short beeps every minute
RF jam Press Status, Receiver Jam Four short beeps every minute
Allegro Control Panel User Manual 31

GE Allegro Specifications

General

Brand	GE
Model	Allegro
Category	Control Panel
Language	English