To Next PageTo Next Page
Need help?Do you have a question about the GE APCD06 Series and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | APCD06 Series |
| Category | Air Conditioner |
| Language | English |
Program the air conditioner to turn On or Off within a 1-24 hour delay. Allows setting On-time or Off-time.
Adjust fan speed between Low and High in Cool or Fan modes. Not available in Dehum mode.
Window on the control panel to aim the remote control for receiving signals.
Shows Set Temperature (F/C) or Time Delay hours. Indicator light shows selected setting.
Use Up/Down arrow buttons to set desired temperature or timer hours.
Cycle through Cool, ECO, Dehum, and Fan modes. Each mode has specific functions.
Turns the air conditioner ON or OFF. Does not disconnect from power supply.
Gradually increases temperature over 4 hours for comfortable sleep. Fan runs on Low.
Toggle between displaying temperature in degrees Fahrenheit or Celsius.
Safely unpack the unit, save packaging, and handle with care. Ensure upright position.
Securely connect the exhaust nozzle to the main window panel assembly.
Install main and extension panels in window, securing with screws and foam strips.
Attach the flexible exhaust hose to the nozzle and the air conditioner's exhaust outlet.
Ensure hose is properly connected and unit is positioned correctly after hose attachment.
Plug into a grounded 3-prong outlet and test the safety plug's reset button.
Clean the cabinet with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
Clean or vacuum air filters weekly for optimal efficiency. Do not operate without filters.
Drain condensed water from the internal tank when the 'Water Full' indicator is on.
Drain water, repackage in original carton, and store in a cool, dry location for long periods.
