GE AvantaPure Professional Series User Manual

32
Rev H
Display Icons
Figure 15
1. Displays amount of conditioning capacity remaining.
2. "PM" indicates that the time displayed is between 12:00 noon and
12:00 midnight (there is no AM indicator). PM indicator is not used if
clock mode is set to 24-hour.
3. When "MIN" is displayed, the value entered is in minute increments.
4. When "LBS" is displayed, the value entered is in pounds.
5. When "Kg" is displayed, the value entered is in kilograms or kilograins.
6. Four digits used to display the time or program value. Also used for
error codes.
7. Colon flashes as part of the time display. Indicates normal operation.
8. X100 multiplier for large values.
9. Shows when water is flowing through the valve.
10. Banner display.
LBS
PM
MIN
KG
x100
9
1
10
4
2
3
4
5
6
7
8
In normal operation and during programming, only a few of the
icons will actually be displayed.

GE AvantaPure Professional Series Specifications

General

Brand	GE
Model	AvantaPure Professional Series
Category	Water Filtration Systems
Language	English