GE b30 - Page 356

3-118 UR FAMILY – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
3.5.3.3 Automatic voltage regulator (Avr)
This element is instantiated in the following products: C70.
Table 3-137: Automatic voltage regulator data objects
3.5.3.4 B90 CT trouble (B_CtTb)
This element is instantiated in the following products: B90.
Table 3-138: B90 CT trouble data objects
3.5.3.5 Breaker arcing current (CBArc)
This element is instantiated in the following products: B30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60, T35,
T60.
Table 3-139: Breaker arcing current data objects
LNName: AvrGAPC# LDevice inst: Ctrl UR element: Automatic Voltage Regulator # element
data obj. data attribute Type FC UR Name Description R/W/C
StrCls SPS AVR # CLOSE PKP operands. R
stVal BOOLEAN ST AVR # CLOSE PKP R
OpCls ACT AVR # CLOSE OP operand R
general BOOLEAN ST AVR # CLOSE OP R
DpoCls SPS AVR CLOSE # DPO operand R
stVal BOOLEAN ST AVR # CLOSE DPO R
StrOpn SPS AVR # OPEN PKP operands. R
stVal BOOLEAN ST AVR # OPEN PKP R
OpOpn ACT AVR # OPEN OP operand R
general BOOLEAN ST AVR # OPEN OP R
DpoOpn SPS AVR OPEN # DPO operand R
stVal BOOLEAN ST AVR OPEN # DPO R
BlkRef1 ORG AVR # BLOCK setting R
setSrcRef ObjectReference SP AVR # BLOCK reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: B_CtTbPIOC# LDevice inst: Ctrl UR element: B90 CT Trouble Zone element # function
data obj. data attribute Type FC UR Name Description R/W/C
Op ACT CT TROUBLE ZONE# OP operand R
general BOOLEAN ST CT TROUBLE ZONE# OP R
LNName: CBArc0SCBR# LDevice inst: Ctrl UR element: BREAKER # ARCING CURRENT element
data obj. data attribute Type FC UR Name Description R/W/C
AbrAlm SPS BKR ARC # OP operand R
stVal BOOLEAN ST BKR ARC # OP R
Dpo SPS BKR ARC # DPO operand R
stVal BOOLEAN ST BKR ARC # DPO R
IntrAlm SPS BKR ARC # MAX OP operand R
stVal BOOLEAN ST BKR ARC # MAX OP R
IntrAlmDpo SPS BKR ARC # MAX DPO operand R
stVal BOOLEAN ST BKR ARC # MAX DPO R
InRef1 ORG BKR # CLR ARC AMPS setting R
setSrcRef ObjectReference SP BKR # CLR ARC AMPS reference to the data attribute to input R/C