GE CareScape V100 - FRU Photos

2048723-002C CARESCAPE V100 Vital Signs Monitor 6-17
Parts lists and drawings: Field-replaceable units (FRUs)
FRU photos
FRU 2037103-002: CARESCAPE plastic kit no printer
FRU 2037103-003: CARESCAPE plastic kit w/ printer
NOTE
Rear case with printer shown.
54
a, j
2037103-086 FRU CARESCAPE V100 BZL, (BP & SpO
2
& TEMP) MS-2011
a
All SpO
2
technology labels included. Select applicable label per monitor configuration.
b
Main boards configured with SuperSTAT NIBP algorithm, Nellcor SpO
2
, and Temperature enabled. Reconfigure as applicable per monitor
configuration. Refer to “Installation” Chapter 3 for more details.
c
All UI board LEDs installed. Cover LEDs with applicable fascia per monitor configuration.
d
Check valve has directional arrow indicating correct orientation for assembly.
e
Fully charge battery before initial use. Refer to “Installation” Chapter 3 for more details.
f
Kit includes all versions of fascia and display covers. Install per monitor configuration.
g
Remove Print button for non-printer versions of monitor. Refer to following assembly drawings.
h
This part number is compatible with product code SDT only. Refer to “Equipment ID” on page 1-13 to determine product code.
j
This part number is compatible with product code SH6 only. Refer to “Equipment ID” on page 1-13 to determine product code.
Bubble Number Part Number Description