GE DINAMAP ProCare - Page 70

4-18 DINAMAP
®
ProCare Monitor Service Manual Revision C
2009381-001
Maintenance: Test Results Form
Heart rate reading (bpm)
Systolic reading (mmHg)
Diastolic reading (mmHg)
MAP reading (mmHg)
Heart rate reading (bpm)
BP OVERPRESSURE
"E80" displayed on SYSTOLIC display
Pump will not start
Overpressure alarm can be cleared
TEMPERATURE TEST
Temperature reading at 80.2° F 79.9° F 80.5° F
Temperature reading at 98.6° F 98.4° F 98.8° F
Temperature reading at 107.8° F 107.5° F 108.1° F
SPO
2
Pulse Value Displayed
Saturation Value Displayed
Signal Strength Bar
"E23" displayed on SpO
2
display
Alarm is silenced, error display remains
Pulse Value
Saturation Value Displayed
Signal Strength Bar
PRINTER TEST
Printout is generated cleanly
Temp Circuit Leakage Current (µA) 50
SpO
2
Circuit Leakage Current (µA) 150
Description Min Max Actual Pass-Fail-N/A