Need help?Do you have a question about the GE Druck DPI 802 and is the answer not in the manual?
General| Accuracy | ±0.05% of full scale |
|---|---|
| Display | LCD |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Pressure Media | Non-corrosive gases |
| Pressure Units | bar, psi, kPa, MPa |
| Power Supply | Battery powered |
Covers dangerous mixtures, instrument condition, pressure release, explosive environments, and electrical shock hazards.
Instructions on selecting the appropriate measurement task from the Select Task menu.
Steps for performing a switch test on pressure switches, including pressure application and observation.
Instructions for measuring current (mA) using the instrument, with external or internal loop power.
Steps to measure pressure or pressure difference using the instrument, including connections and settings.
Procedure for calibrating a transmitter using the instrument, with external or internal loop power.
Guidance on performing pressure measurements with a Universal Measurement Module (UMM).
Procedure for performing a leak test on a pressure system, including connections and test parameters.
Step-by-step guide for performing pressure calibration on P1/P2 inputs.
Step-by-step guide for performing mA input calibration on the instrument.
Details accuracy specifications for pressure measurements, including standard and premier precision.
To Next Page