Need help?Do you have a question about the GE Druck DPI 800 and is the answer not in the manual?
General| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
|---|---|
| Pressure Range | Ranges from -14.5 to 10, 000 psi (-1 to 700 bar) depending on model |
| Accuracy | 0.05% of full scale |
| Display | LCD |
| Pressure Media | Non-corrosive fluids and gases compatible with stainless steel |
| Pressure Units | bar, psi, kPa, MPa |
| Power Supply | external power supply |
| Outputs | RS232 |
| Resolution | 0.001 |
Explains the meaning of symbols and marks used on the instrument.
Details the location and function of physical components on the instrument.
Instructions on how to turn the instrument on and off.
Guide for basic operational setup using the Set Up menu.
Explains the various indicators and information shown on the instrument's display.
Instructions on selecting measurement tasks from the menu.
Guide to adjust measurement operation settings via the Settings menu.
Describes how to set up labels and scaling for functions like x:y Scaling.
Details how to properly connect pressure lines to the instrument.
Explains connecting the Universal Measurement Module (UMM) via the communications port.
Step-by-step guide to measure pressure or pressure difference.
Instructions on performing a leak test on a pressure system.
Procedure for performing switch tests on pressure switches.
Guide for calibrating a transmitter using the instrument.
Steps to measure current (mA) using the instrument.
How to perform pressure measurements with a UPM.
Explains common error codes and troubleshooting steps.
Instructions for cleaning the instrument case safely.
Guide on how to replace the instrument's batteries.
Prerequisites and checks before performing calibration.
Detailed steps for calibrating pressure inputs P1/P2.
Steps for calibrating the mA input function.
Instructions for calibrating the IDOS UMM.
General specifications like languages, operating temperature, and safety standards.
Accuracy specifications for pressure measurement ranges.
Details specifications for the electrical connectors and terminals.
To Next Page