Need help?Do you have a question about the GE Druck DPI 705 IS and is the answer not in the manual?
General| Type | Digital Pressure Indicator |
|---|---|
| Ingress Protection | IP54 |
| Media Compatibility | Non-corrosive fluids and gases |
| Pressure Units | bar, psi, kPa, MPa |
| Intrinsic Safety | ATEX and IECEx certified |
| Operating Temperature | -10°C to +50°C |
| Display | LCD |
| Dimensions | 200 x 100 x 50 mm |
| Communication Interface | USB |
| Power | Rechargeable battery or external power supply |
Explanation of CE, warning, and disposal symbols.
General overview of the pressure indicator.
Technical parameters of the device.
General safety precautions and symbol interpretation.
Warnings regarding pressure limits and ports.
Guidelines for battery handling and replacement.
Instructions for cleaning the instrument.
Information about the manual's applicability to software versions.
Meanings of various symbols shown on the display.
Key operational functions like timeout, leak test, zeroing, and alarm.
Details of ATEX certification and markings.
Specifics for batteries and installation in hazardous areas.
Details of CSA certification and markings.
General maintenance advice, including calibration checks.
Steps required before performing calibration.
Step-by-step guide for calibration.
Instructions for modifying the Personal Identification Number.
To Next Page