EasyManua.ls Logo

GE Druck DPI 802 - Specification Data; Electrical Connector Specifications

GE Druck DPI 802
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 - [EN] English
K335 Issue 3
Table 10: DPI 800 series pressure connections
Table 11: Maximum pressure (+ port)
Table 12: Maximum pressure (Reference port)
Specification - Electrical connectors (A2)
Ranges Pressure connections
(One IDOS range)
Pressure connections
(Two IDOS ranges)
g/d: 30 psi g (2 bar g)
Standard or Premier
1/8 NPT female (+ port) + 1/8 NPT female reference
port OR
G1/8 female (+ port) + G1/8 female reference port
Two 1/8 NPT female (+ port) + 10-32 UNF reference
port OR
Two G1/8 female (+ port) + M5 reference port
g/d: > 30 psi g (2 bar g)
Standard only
1/8 NPT female (+ port) OR
G1/8 female (+ port)
Two 1/8 NPT female (+ port) OR
Two G1/8 female (+ port)
g/d: > 30 psi g (2 bar g)
Premier only
1/8 NPT female (+ port) + 10-32 UNF reference port OR
G1/8 female (+ port) + M5 reference port
Two 1/8 NPT female (+ port) + 10-32 UNF reference
port OR
Two G1/8 female (+ port) + M5 reference port
sg or a: all ranges G1/8 female (+ port) OR
1/8 NPT female (+ port)
Two 1/8 NPT female (+ port) OR
Two G1/8 female (+ port)
Ranges: g/d, sg, a MWP Maximum transient /
intermittent pressure
5 psi (350 mbar) 2 x FS 4 x FS
> 5 psi (350 mbar) 1.2 x FS 2 x FS
Ranges: g/d only MWP
5 psi (350 mbar) 2 x FS
10 to 15 psi
(700 mbar to 1 bar)
1.2 x FS
30 psi (2 bar) 30 psi (2 bar)
Range (Measure) 0 to ±55 mA
Accuracy 0.02% of reading + 3 counts
Temperature coefficient
14 … 50°F, 86 … 122°F
(-1010°C, 30 … 50°C)
0.0011% FS / °F
(0.002% FS / °C)
Switch detection Open and closed. 2 mA current.
Loop power output 24 V ± 10%
HART
®
resistor
250 (menu selection)
Connectors (A2) Three 0.16 in (4 mm) sockets

Related product manuals