EasyManua.ls Logo

GE E1250TW - Blink Detection; B Shutter (Slow Shutter)

GE E1250TW
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60 61
60 61
take a while to be processed and displayed after shooting.
(The Slow Shutter is only available under the Manual
mode ).
To set the exposure time: Touch the or
button to adjust the exposure time. Press and
hold the button for 2 seconds to automatically
increases / decreases the exposure time to the
limit between 2 to 30 seconds.
The B Shutter (Slow Shutter) will be turned o
when the value is set to zero. You need to reset
the value for every shot. The default value of the
camera is 0 seconds.
The use of tripod is recommended on a long-term
exposure.
Blink detection
When Blink Detection is active, a warning message
appears on the screen when the camera detects that a
person's eyes are closed.
On
O
When the Blink Detection is active, the icon
will be shown on the screen.
B shutter (slow shutter)
When the Slow Shutter is active, the shutter will stay open
for the pre-set exposure time when you keep the shutter
button depressed. Since the camera will automatically
reduce image noise in slow shutter mode, image may

Table of Contents

Other manuals for GE E1250TW

Related product manuals