GE E1250TW - Print the DPOF Image; Disconnect the USB Cable

84 8584 85
Print the DPOF image
To print DPOF images, you need to select the images
for the DPOF setting in advance. Refer to DPOF section
on page 66.
1. In the
DPS menu, select DPOF Images to print. The
following screen will be shown:
2. Select Yes to continue (or No to cancel).
Disconnect the USB cable
Select the USB Disconnecting icon at the upper
right corner of the screen to exit the DPS menu. The
screen shows the ‘Disconnect the USB cable’ message.
Once this message is shown on screen it is safe to
disconnect the USB cable from the camera and the
printer.