GE E1250TW - LCD Brightness; Power Saver

68 69
68 69
LCD brightness
Use this setting to adjust the brightness of your LCD
screen.
1. In the camera setting menu, select LCD Brightness.
2. Touch the Auto
or Manual button and then
press button to conrm.
3. By selecting the Manual option, you can adjust the
brightness manually as desired by pressing
the or button.
Press and hold the or button (for 2
seconds) to automatically adjust the level itself
until it reaches the brightest or the darkest.
Power saver
This setting allows you to save power and get the maxi-
mum possible running time for your battery. Follow
the steps below to turn o the LCD screen and camera
automatically after a period of idleness.
1. Select
Power saver in the camera setting menu.
2. Press the
or button to adjust the idle
period before the LCD screen or the camera is
automatically power-o.
• LCD Screen: Power On/30 sec./1 min./2 min.
• Camera: Power On/3 min./5 min./10 min.