GE G60

GE Multilin G60 Generator Protection System 9-11
9 APPLICATION OF SETTINGS 9.1 SETTING EXAMPLE
9
9.1.13 INPUTS/OUTPUTS
The following inputs and outputs will be used in this example. Make the following changes in EnerVista UR Setup or
through the
SETTINGS  INPUTS/OUTPUTS  CONTACT INPUTS  CONTACT INPUT H7a(H7c) menus:
Make the following changes in EnerVista UR Setup or through the
SETTINGS  INPUTS/OUTPUTS  VIRTUAL OUTPUTS 
VIRTUAL OUTPUT 1(4) menus:
Make the following changes in EnerVista UR Setup or through the SETTINGS  INPUTS/OUTPUTS  CONTACT OUTPUTS 
CONTACT OUTPUT H1(H4) menus: