– 24 –
To stack the dryer:
Caution: Do not lay the dryer on its back. Use the
packing material or a protective surface when
laying dryer on its side.
1. Carefully lay the dryer on its side.
2. Use an open end wrench or pliers to remove the
4 dryer leveling legs from the leg brackets.
3. 5HPRYHWKHDGKHVLYHEDFNLQJDQG¿UPO\SODFH
the 4 rubber pads over the leg brackets.
4. Align the holes in the left bracket with the holes
in the bottom left corner of the dryer. Attach the
bracket using 2 (#12 x 1 in.) Phillips head screws.
5. Align the holes in the right bracket with the
holes in the bottom right corner of the dryer.
Attach the bracket using 2 (#12 x 1 in.) Phillips
head screws.
(Continued next page)
Leg Bracket
Back out and remove
all 4 leveling legs
To Next Page
Loading...
