GE GTD75GCPLDG User Manual

11
Correct
Venting
Incorrect
Venting
For the best drying performance, the dryer needs to be properly vented. The dryer
will use more energy and run longer if it is not vented to the below specifications.
Carefully follow the details on Exhausting in the Installation Instructions.
 Use only rigid metal 4” diameter ductwork inside the dryer cabinet. Use only rigid metal or
UL listed flexible metal 4” diameter ductwork for exhausting to the outside.
 Do not use plastic or other combustible ductwork.
 Use the shortest length possible.
 Do not crush or collapse.
 Avoid resting the duct on sharp objects.
 Venting must conform to local building codes.
About venting the dryer. GEAppliances.com
- Fire Hazard
WARNING
This dryer MUST be exhausted to the outdoors.
Use only 4” rigid metal ducting for the home exhaust duct.
Use only 4” rigid metal or UL-listed dryer transition duct to connect the dryer
to the home exhaust.
DO NOT use a plastic vent.
DO NOT exhaust into a chimney, kitchen exhaust, gas vent, wall, ceiling,
attic, crawl space, or concealed space of a building.
DO NOT install a screen in or over the exhaust duct.
DO NOT use duct longer than specified in the exhaust length table.
Failure to follow these instructions can result in death or fire.

GE GTD75GCPLDG Specifications

General

Color	gray, diamond gray
Dryer Capactity	7.4 cubic feet
Number of Cycles	14
Cycle Selections	antibacterial, bulky items, damp dry, dewrinkle, extended tumble, jeans, mixed load, quick fluff, sanitize, steam dewrinkle, steam refresh, towels/ sheets
Options	edry, extended tumble, my cycle, delay dry, volume, damp alert
Stackable	no
Venting	no
Temperature Settings	5
Temperature Selections	high, medium, low, extra low, no heat
Temperature Control	no
Delay Start	yes
Child Lock	no
Cycle Signal	yes
Moisture Sensor Option	yes
Steam	yes
Smart Home	yes

Weight and Dimensions

Depth	30 1/2 inches
Height	48 inches
Width	27 inches