To Next PageTo Next PageWhy does my GE Washer make a “squeaking” sound?
If you hear a “squeaking” sound from your GE Washer, it could be that the washer isn't level and is rubbing on the cabinet. To fix this, adjust the leveling legs by rotating each leg in the proper direction until the washer is stable.
Why does the basket seem loose in my GE GTW491?
If the basket seems loose in your GE Washer, it's normal. The washer basket does not have a traditional brake and will move freely.
What to do if there is low water flow in my GE GTW491?
If you are experiencing low water flow in your GE Washer, turn off the water source and remove the water connection hoses from the upper back of the washer and the water faucets. Clean both the hose screens (if so equipped) and the screens in the machine using a brush or a toothpick. Reconnect the hoses and turn the water back on. Check to ensure there are no leaks at the connections.
Why is there lint or residue on my clothes after washing in my GE Washer?
If you're finding lint or residue on your clothes after washing in your GE washer, several factors could be at play. If you air dry your clothes, they may retain more lint. Ensure you're separating lint producers from lint collectors during washing. Avoid washing loads for too long; use the Light Soil setting for smaller loads and consider using a liquid detergent with warmer water to help detergents dissolve better. Overloading the washer can also cause this issue, so load clothes loosely around the outside of the basket. Finally, check the fabric softener package for instructions, ensure correct usage, and select the Deep Rinse option if available.
Why are there colored spots on my clothes after washing in my GE GTW491 Washer?
Colored spots on clothes after washing in your GE washer can be due to incorrect use of fabric softener or dye transfer. Check the fabric softener package for instructions, follow directions for using the dispenser, and ensure you've selected the Deep Rinse option, if available. Sort whites or lightly colored items separately from dark colors to prevent dye transfer.
How to remove lint from clothes in my GE GTW491 Washer?
If you're finding lint or residue on your clothes after washing in your GE washer, several factors could be contributing. If you air dry your clothes, they may retain more lint. Ensure you're separating lint producers from lint collectors. Avoid washing small loads for too long by using the Light Soil setting. If the detergent isn't dissolving properly, try using a liquid detergent and warmer water. Finally, avoid overloading the washer; loosely load clothes around the outside of the basket for best results.
Why are there snags, holes, tears, rips or excessive wear on my clothes after washing in my GE GTW491?
Snags, holes, tears, rips, or excessive wear on clothes after washing in your GE washer can occur due to: * Pins, snaps, hooks, sharp buttons, belt buckles, zippers, and sharp objects left in pockets. Fasten snaps, hooks, buttons, and zippers. Remove loose items like pins, objects in pockets, and sharp buttons. Turn knits (which snag easily) inside out. * Undiluted chlorine bleach. Check the bleach package instructions for the proper amount and never add undiluted bleach to the wash or allow clothes to come into contact with undiluted bleach. * Chemicals like hair bleach or dye, or permanent wave solution. Rinse items that may have chemicals on them before washing and use the Speed Wash cycle with the Extra Rinse option (on some models).
Why is the water temperature incorrect in my GE GTW491 Washer?
If the water temperature in your GE Washer seems incorrect, first ensure that both hot and cold water faucets are fully turned on and that the hoses are connected to the correct faucets, noting the “H” and “C” markings on the water valves. Check the water valve screens for blockage by turning off the water source, disconnecting the hoses, cleaning the screens with a brush or toothpick, reconnecting the hoses, and turning the water back on, ensuring no leaks. Finally, verify that your house water heater is set to deliver water between 120°F and 140°F (48°C–60°C).
Why are my clothes grayed or yellowed after washing in my GE Washer?
If your clothes are grayed or yellowed after washing in your GE Washer, ensure you are following the detergent manufacturer’s directions for the amount to use. If you have hard water, use a water conditioner or install a water softener. Make sure your water heater is delivering water at 120°F–140°F (48°C–60°C). Avoid overloading the washer; loosely load clothes no higher than the top row of holes in the washer basket, loading items around the outside for best results. Sort clothes by color, especially if the fabric label indicates that unstable dyes may be present.
How to reduce wrinkling in my GE GTW491?
To minimize wrinkling when using your GE Washer: Select the appropriate cycle for the fabric type, especially for easy-care loads. Avoid mixing heavy items like jeans with lighter items like blouses, and consider using a fabric softener. Do not overload the washer; loosely load clothes in the basket. Wash clothes in warm or cold water to avoid repeated washing in excessively hot water.
General
