GE IM-5D User Manual (English)

Questions and Answers:

J
johnsmithJul 28, 2025
Why is my GE IM-5D automatic icemaker not working?
- S
  Stephen JacksonJul 28, 2025
  Several factors can prevent your GE Ice Maker's automatic icemaker from working. The freezer compartment may be too warm—allow 24 hours for complete cool down after installation. The icemaker might not be turned on—check the icemaker button on the control. Ensure the icemaker cord is fully plugged in. Inspect the plastic water line for kinks. Confirm the house water supply is on. Also, piled-up cubes can shut off the icemaker; level them by hand.
P
Pedro FoxAug 3, 2025
Why is my GE Ice Maker slow to make ice or not cold enough?
- J
  Jennifer ArcherAug 3, 2025
  If your GE Ice Maker is producing ice slowly or the freezer isn't cold enough, check if the door is being held open by packaging. Also, refer to the Owner’s Manual for temperature control settings to ensure it is set correctly.
J
Jennifer NorrisAug 9, 2025
Why are my GE IM-5D's ice cubes too small or is making ice slowly?
- M
  Madison HaleAug 9, 2025
  Small ice cubes or slow ice production in your GE Ice Maker can be due to a clogged water shutoff valve connecting the refrigerator to the house water line. It is recommended to drill a 1/4" hole in the water pipe to connect the water. Also, check the plastic water line for any kinks.
B
bmartinAug 15, 2025
What to do if there's leaking water behind my GE IM-5D refrigerator?
- J
  jesusgonzalezAug 15, 2025
  If you notice water leaking behind your GE Ice Maker refrigerator, ensure that the house supply is firmly attached to the water valve.
B
Brittney HendersonAug 21, 2025
What to do if there is leaking water around the fill cup of my GE IM-5D Ice Maker?
- R
  Robert ScottAug 21, 2025
  If water is leaking around the fill cup of your GE Ice Maker, check that the fill tube is correctly inserted in the fill cup opening.