GE J1050 - Setting the USB mode; Connecting to a PictBridge compatible printer

7676 77
FW Ver. (Firmware version)
Use this setting to view the current camera rmware
version.
1. Select the
FW Ver. setting from the Setup menu as
described previously.
2. If SD card contains a new version of rmware, please
upgrade accordingly as necessary.
Reset Settings
Use this setting to restore the camera to its default
settings.
1. Select the
Reset setting from the Setup menu as
described previously.
2. Use the
Up/Down navigation buttons to select Yes
or No. Then press the button to conrm.