What should I do if there was a power outage and the clock flashes on my GE Ranges?
If you've experienced a power outage and the clock is flashing on your GE Ranges, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
What to do if there is excessive smoking during the clean cycle of my GE JB645?
If you notice excessive smoking during the clean cycle of your GE Ranges, it's likely due to excessive soil or grease. Press the Cancel/Off pad, open the windows to vent the smoke, wait until the LOCKED light turns off, wipe up the excess soil, and then reset the clean cycle.
Why does the display go blank on my GE JB645 Ranges?
A blank display on your GE Ranges could be due to a blown fuse or tripped circuit breaker in your home. Replace the fuse or reset the breaker. The clock might also be turned off. Finally, verify that the oven is not in Sabbath Mode.
Why is my food not broiling properly in my GE Ranges?
Food may not broil properly in your GE Ranges due to several reasons: improperly set oven controls (make sure you select the appropriate broil mode), improper rack position, food being cooked in a hot pan (make sure cookware is cool), cookware not suited for broiling (use a pan specifically designed for broiling), aluminum foil used improperly on the broiling pan and grid (conform to pan slits if using aluminum foil), or low power (voltage) in some areas (preheat the broil element for 10 minutes).
Why is my food not baking properly in my GE JB645 Ranges oven?
Food may not bake properly in your GE Ranges oven due to several reasons: improperly set oven controls, incorrect rack position or a rack that isn't level, incorrect cookware, a need to adjust the oven temperature, or ingredient substitutions. Substituting ingredients can change the recipe outcome.
Why won't my GE JB645 surface unit maintain a rolling boil?
Your GE Ranges surface unit may not maintain a rolling boil because of improper cookware or low power (voltage). Ensure you're using flat pans that match the diameter of the surface unit. If power is low in your area, cover the pan with a lid to retain heat until the desired temperature is reached.
What to do if my GE JB645 Ranges oven does not work?
If your GE Ranges oven isn't working, check if a fuse in your home may be blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker. Also, see the 'Using the Oven' section to ensure the oven controls are properly set. Finally, verify that the oven is not in Sabbath Mode.
Why are the clock and timer not working on my GE Ranges?
If the clock and timer on your GE Ranges are not working, check the following: * A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. * Make sure the range is completely plugged into a properly grounded electrical outlet. * Verify that the oven controls are set correctly. Refer to the 'Using the kitchen timer' section.
General| Type | Freestanding |
|---|---|
| Number of Burners | 4 |
| Oven Capacity | 5.3 cu. ft. |
| Self-Cleaning | Yes |
| Color | Stainless Steel |
| Cooktop Type | Coil |
| Oven Type | Single |
| Oven Window | Yes |
| Voltage | 240 V |
| Control Type | Electronic |
| Width | 30 inches |
To Next Page
