Cleaningthe glass cooktop.
Cleanyourcooktopafter
eachspill. UseCERAMA
BRYTE®CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY useCE]_V/A BR'_FE®Ceramic
Cooktop Cleaner on the gktss cooktop.
Other creams may not be _tseffective.
To maintain and protect the surface of
your ,glasscooktop, follow these steps:
%
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE®Cermnic Cooktop CleaneL
This helps protect the top and
makes cleanup easieL
[] Daily use of CERAMA BRYTE®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
@
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
directly to the cooktop.
[]
Use a paper towel or CERAMA
BRYTE®Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthat youDONOT
heatthecooktopuntil it hasbeencleaned
thoroughly.
Use a CERAMA BRYTE_Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGEto yourglasssurface
mayoccurif youusescrubpadsotherthan
thoserecommended.
Allow the cooktop to cool.
Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
on the entire burned residue area.
%
Using the included CERAMA
BRYTE ®Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
@
If any residue remains, repeat the
steps listed above as needed.
Fox additional protection, after
all residue has been removed,
polish the entire surface with
CERAMA BRYTE®Ceramic
Cookmp Cleaner and a paper towel.
The CERAMABRYTEC_Ceramic
Cooktop Scraper and all
recommended suppfies are
available through our Parts Center.
See instructions under "ToOrder
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
%
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
remove the residue.
%
After scraping with the razor
scrapm; spread a few drops of
CERAMA BRYTE®Ceramic
Cookmp Cleaner on the entire
burned residue area. Use the
CERAMA BRYTE®Cleaning Pad to
remove any remaining residue.
Fox additional protection,
after all residue has been
removed, polish the entire
surface with CERAMA BRYTE®
Ceramic Cookmp Cleaner
and a paper towel.
22
To Next Page
Loading...
