GE JBS55 - Light; Shelves; Storage Drawer Removal

ge.com
Oven Shelves
Clean file oven shelves Mth an abrasive
cleanser or scouring pad. After cleaning,
rinse the sheNes Mth clean water and dry
wkh a clean doth.
To make the sheh'es slide more easily,
apply a small amount of vegetable oil
m a paper towel and wipe the edges of
the oven shelves with the paper towel.
Do not spray with Pmn ®or other
lubricant sprays.
I Stopguide
Storage Drawer Removal
Toremovethedrawer:
[] Pull the drawer out until it stops.
[] I,ift the flont of the drawer until the
stops clear the guides.
[-_ Remove the dmweL
Toreplace the drawer:
[-]-] Place the drawer mils on the guides.
Push the drawer back until it stops.
[] Lift the flont of the drawer and push
back until the stops clear the guides.
[] Lower the flont of the drawer and
push back until it closes.
ii i!iiilii I;II i!ii211il
Wire cover holder.
Oven Light Replacement
CAUTION:Before replacing your oven
light bulb, disconnect the electrical
power to the range at the main fuse or
circu# breaker panel
Be sure to let the light cover and bull)
cool completely.
Toremovethecover:
%
Hold a hand under the cover so it
doesn't fall when released. With
fingers of the same hand, firefly
push back the wire cover holdeL
I Jft off"the coveL
Donotremoveanyscrewstoremovethecover
Replace t)ulb with a 40-watt
appliance bulb.
Toreplacethe cover:
Place it into groove of the light
receptacle. Pull wire forward m
the center of the cover until it
snaps into place.
Connect electrical power to
the range.
Oven Heating Elements
Donot cleanthebakeelementorthebroil
element.Anysoilwill bumoffwhenthe
elementsareheated.
To clean the oven flooi; gently lift
the bake element. Clean with warm
soap), wateL
21