MCROWA~
TM
COO~G
(continued)
~o-Stige
Microwave Time
Coobg
m
Step 1: Touch Microwave MICRO
:::;
COOK and the desired number pads for
first stage cooking time, as described in
o
flART
Steps 1 and 2 on previous page.
Step 2: Touch POWER
LE~L.
Touch the number
pad for first stage power level or oven automatically
cooks at High (10).
Step
4:
Now
touch START. First stage
cooking time appears on the display
counting down. When the first stage time
ends, the oven automatically changes to the
second stage of cooking and power level.
When cooking is finished, the display
shows “End,” the oven signals and turns off.
Step
3:
For the second cooking stage, touch
If you interrupt Microwave Time Cook to check the
Microwave MICRO COOK and the numbers for
food, simply close the door and press START to
second phase cooking time. If a different power level
resume cooking. If there is not time remaining on the
is required, see “How to Change Power Level” below.
timer you must reset the timer to resume cooking.
How to Change Power
hvel
1. Press Microwave MICRO COOK.
2. Select cooking time.
3. Press POWER
LEWL.
4. Select power.
5. Press START.
Temperature cooking uses a special food Temperature cooking takes the guesswork out of
thermometer to measure the internal temperature
cooking because the oven automatically switches to
of food as it cooks. For many foods this is the
Hold after reaching the preset food temperature and
best test of doneness. Heating or reheating foods
maintains that temperature until you touch the
accurately to the desired serving temperature
CLEAWOFF
pad.
is easy.
The Temperature Probe
The temperature probe is a food thermometer that
gauges the
intemd temperature of your food.
(Its appearance may vary from picture at right.)
The probe must be used when using Microwave
Temperature Cooking, Convection Temperature
Cooking, Combination Temperature Cooking and
Combination Auto Roast. To use your probe properly,
follow directions on the next page.
Cable
End
—
20
To Next Page
Loading...
