HOW TO USE THE HOLD TIMER
The hold timer operates without microwave energy and has three
timing functions:
• It operates as a minute timer.
• It can be set to delay cooking.
• It can be used as a hold setting after defrosting.
12
How to Time a 3-Minute Phone Call
1. Press the HOLD TIMER pad.
2. Press the number pads 3, 0 and 0 (to
set 3 minutes and no seconds).
3. Press the START pad. The display shows
the time counting down.
4. When time is up, the oven control
signals.
Using a Holding Time
The hold timer can also be used to program a holding time between
microwave cooking functions. The time can range from 1 second to 99
minutes and 99 seconds.
Programming Delayed Cooking
1. To delay cooking up to 99 minutes
and 99 seconds, press the TIME
COOK or the TEMP COOK/HOLD
pad and enter the Cook Time or the
temperature.
2. Press the HOLD TIMER pad and
enter the number of minutes to delay
cooking.
3. Press the START pad. The timer will
count down to zero and then cooking
will begin.
NOTE: When delaying the Temp Cook function,
be sure the probe is in the food before pressing the
START pad.
To Next Page
Loading...
Need help?
General
