EasyManuals Logo

GE JKP69 User Manual

GE JKP69
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Operating the Self-Cleaning Oven
How to Set the Oven to Start Cleaning Now
1. Follow the steps in the Before a Clean
Cycle section.
2. Press AUTO SELF CLEAN. The
display will show the last clean time
used. You can change the clean time
to any time between 1
1
2
to 4 hours,
depending on the amount of soil in
your oven.
3. Press the INCREASE or DECREASE
pad to change the amount of cleaning
time.
4. Press START.
“LOCKED” flashes in the display
while the door locks automatically. It
will not be possible to open the oven
door until the temperature drops
below the lock temperature and the
LOCKED light goes off.
5. When the LOCKED light is off, open
the door.
NOTE:
The display will flash “DOOR” and the control will
beep 3 times if you set the clean cycle and forget to
close the oven door.
Both the lower oven fan and the microwave fan may
operate during the self-clean function and continue
to operate until the oven temperature has cooled.
This is normal, and the fans may continue to run
even after the oven is turned off.
Easy Steps:
1. Press AUTO SELF CLEAN.
2. Press the INCREASE or DECREASE pad to
change the clean time.
3. Press START.
How to Set the Oven to Delay the Start of Cleaning
Delay Start is setting the oven to start the clean cycle
automatically at a later time than the present time
of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow the steps in the Before a Clean
Cycle section.
2. Press AUTO SELF CLEAN. The
display will show the last clean time
used. You can change the clean time
to any time between 1
1
2
to 4 hours,
depending on the amount of soil in
your oven.
3. Press the INCREASE or DECREASE
pad to change the amount of cleaning
time.
4. Press STOP TIME. “STOP TIME”
and the earliest stop time you can set
appear in the display. The earliest stop
time will be the clean time selected
plus the time of day.
Press the INCREASE or DECREASE
pad to change the stop time to a later
time of day if desired.
5. Press START.
“LOCKED” flashes in the display
while the door locks automatically.
The display will show the start time
and the stop time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED light
goes off.
6. When the LOCKED light is off, open the door.
NOTE: The display will flash “DOOR” and the
control will beep 3 times if you set the clean cycle and
forget to close the oven door.
(continued next page)
Easy Steps:
1. Press AUTO SELF CLEAN.
2. Press the INCREASE or DECREASE pad to
change the clean time.
3. Press STOP TIME.
4. Press the INCREASE or DECREASE pad to
change the stop time.
5. Press START.
45

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JKP69 and is the answer not in the manual?

GE JKP69 Specifications

General IconGeneral
BrandGE
ModelJKP69
CategoryMicrowave Oven
LanguageEnglish

Related product manuals