Usingthesurface units. GEApptia.o oom
Yournew Profile Cooktopmakesan eloquentstatementof style,convenience,andkitchenplanningflexibility Whetheryou
choseit for itspurity of design,assiduousattentiontodetail,or for bothofthesereasons- you71find thatyour Profile
cooktop'ssuperiorblendofform andfunctionwill delightyou for yearsto come.
Thiscooktopcontainsseveralnew features suchas pan detection andpan sizing.Thetouchcontrols give youprecise
control of thesurfaceunits.Youcan quicklyswitch between asteady low heat andfull power or anysettingin between.
Theinformationon thefollowing pageswillhelp youoperateand maintainyour cooktopproperly.
NOTE:Throughoutthismanual,features andappearancemayvaryfromyour model
Never cook directly on the glass.
Always use cookware.
Abvays place the pan in the center of
the surface unit you are cooking on.
Donotslidecookwareacrossthe
controlor coo_og surfacebecause
it canscratchtheglass. The glass is
scratchresistant,notscratohproof
About the radiant surface units...
The radiant cooktop features heating
units beneath a smooth gl_.ss surface.
Cooktop temperatures increase with
the number of surtZace units that are
on. With 3 or 4 uniLs turned on, surface
temperatures are high. Always use
caution when umching the cooktup.
The ON/OFFindicator lights will come
on next tu the Bridge, Warmer and Dual
burnel_when activated. Lights _dso
activ-atefor the Pan Detect and Control
Lock features when they are turned on.
The indicator lights will go offwhen the
surt:ace refitor feature isturned off.
The appropriate HOTSURFACEindicator
light will glowwhen its corresponding
radiant element is turned on, and win
remain on until the sur[Zace has cooled
below 150°F.
NOTE:
Hot surface indicator light will:
_,_Comeonwhenthesurfaceunitis
turnedon.
_,\_Stayonevenafter theunitis turnedofL
!_ Glowbrightlyuntil theunithascooled
below 150°E
NOTE:A slight odoris normalwhena new
cooktopis usedfor thefirst time.It is causedby
theheatingofnewpertsandinsulatingmaterials
and will disappearin a shorttime.
It is safe tu place hot cookware from the
oven or surfaceon the gl_ss cooktop
when the surface is cool. Negerplage
cookware onthecontrolarea.
Even after the surface units are turned
off, the glass cooktop retains enough
heat to continue cooking. To awfid over-
cooking, remove pans from the surface
units when the food is cooked. Awfid
placing anything on the surface unit
until it has cooled completely.
@ Waterstains(mineraldeposits)are removable
usingthecleaningcreamor full strengthwhite
vinegar.
_ Useof windowcleanermayleavean
iridescenthTmonthecooktop.Thecleaning
creamwill removethisdiscoloration.
_. Don't storeheavyitemsabovethecooktop.
If theydroponto thecooktop,theycancause
damage.
Donot usethesurfaceasa cuttingbeard.
Radiant Surface Units
The controls for the radiant surface units
allow for l l different heat settings: I_w,
1-9. and High. The headng element may
not visibly glow at low heat settings.
NOTE"Thiscooktophasa rapidbeat-gOfeature.
If thecooktngis cool whenturnedon,it will glow
red fora shortperiodof timeuntil thedesired
powersetting is reached.If thecooktopis already
warm,therapidheat-upfeaturemaynot activate.
Single Surface Unit
!!i iliilQ iil ,tumooasinglesor counit
..... .................................. [] Touch the ON/OFFpad, then tuuch
the 1+)/(-)pad. The surface unit will
turn on to power setting 5.
_iiiiiiiiiiiiiiiiiiiiiiiiiioFli iiiiiiii :
i_ _i!iiiiiiii_i_i _ _
6
[] Use the (+)/(-)pad to choose the
desired power setting. The control
will beep each time a pad is touched.
To turn offa standard surface unit, touch
the ON/OFE pad again.
To Next Page
Loading...
